CNC Router Milling Machine

Based on C-Beam, V-Slot, Xtreme Solid V-Wheels and TR8x8(P2) Leadscrews, it is reliable. It has been carefully designed and can accurately cut foams, woods, plastics and aluminium to 0.1-0.2 mm accuracy or better. With a WorkBee CNC Kit, you can manufacture functional engineering parts, toys, signs, or whatever you can imagine without leaving the workshop.

Compatible Material for Cutting/Milling/Engraving:

Aluminium / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam

This Full Kit Includes:

• CNC Mechanical Kit
• 4 x Nema23( 1.26N.m) Stepper Motors
• Cable Drag Chain Bundle
• Wiring Cable Kit
• All Extrusions are M5 Tapped as where it is necessary.

Specs of Nema 23 Stepper Motor:

• NEMA 23
• Shaft Size: 1/4″
• Step Angle: 1.8

Specs of 1.5 kW Air/Water Cooled Spindle:

• Spindle Net weight: 2.6kg
• Power: 1.5 kW
• Frequency: 400 Hz
• Speed: 8000-24000 R/min
• Run-out off: less than 0.005 mm
• Grease Lubrication
• VFD Inverter 1.5 kW 220 V or 110 V
• Collet: ER11

Z Height

54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoiler board. The spoiler board supports have two height configurations; these are the maximums for each configuration.

Motion

Drive System - ACME Lead Screws Or GT3 Timing Belts

Linear Guides - Polycarbonate wheels on anodised C-Beam V-Slot Extrusion.

Motors - NEMA23 175oz Stepper Motors (X, Y & Z)

Accuracy - 0.05 - 0.10mm (Screw Driven) Or 0.10 - 0.20mm (Belt Driven)

Dual Drive System:

The WorkBee is available from regular size 500x750mm up to 1500x1500mm both for screw-driven and belt-driven!

The CNC also has two different spoiler board configurations. One for shallow work up to 27mm deep, and a lowered setup to 47mm deep. Having this option is beneficial. If the plan is only to cut thin materials, it is a waste of rigidity to have the Z-Axis reach down more than needed. The Screw Driven version, the right image above, shows the lowered configuration.

Z Travel Explained:

The maximum travel of the Z-axis can reach 94mm.
Z Height: 54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoiler board. The spoiler board supports have two height configuration; these are the maximums for each configuration.

The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. In this case, 54mm is the maximum thickness of material that will fit on the machine.
To calculate the max cutting depth for a chosen piece of material, it is:

Max Cutting Depth = Z travel – Material Thickness

For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max cutting depth would be:

Max Cutting Depth = 54 – 30 = 24mm

This means with a 30mm piece of material, and it would not be possible to cut it the whole way through.

The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that could be cut the entire way through. And for the lower configuration, the maximum depth that can
be cut the entire way through is 47mm

100% Replacement Guarantee

 --------------------------------------

  BUY WITH CONFIDENCE    

We truly believe in the best customer support, that is why we will do whatever it takes to make sure you have a positive purchasing experience. We respond within 24 hours of emails and will make sure all your concerns are answered ASAP. All order are delivered in 7-10 days to USA

180 DAYS MONEY BACK GUARANTEE 

There's absolutely ZERO RISK buying from the Universal Engraver- so send us an email if you need any assistance. 
UNIVERSAL ENGRAVER'S 5-POINT HAPPINESS CHECKLIST

1. FREE shipping. No surprises or hidden fees. 
2. Safe payments via  PayPal® 
3. 180 Day Money Back Guarantee 
4. We always there to assist you. 
5. Tracking number for every order 

We use encrypted SSL certificates for 100% security.   

-----------------